Bidding Closes in
Multiple Locations, Multiple Locations, Michigan, 48066, United States
Multiple Locations! Shop Supplies, Electrical MRO, Test Equipment, Electronics, Tooling, Industrial Electronic MRO Items, LAB Equipment, CNC Lathes, Freightliner Tractor Trailer, Dump Trailer, And Much More!
Stock #: 104437
CNC control: OSP-P200L-R, # axis: 2, Swing: 20.47", Turning diameter: 15.35", Center distance: 19.68", Chuck size: 10", Bar capacity: 3.14", X axis travel: 8.66", Z axis travel: 20.47", Rapid traverse (x/z): 787/985 ipm, Spindle nose: A2-8, Spindle speed: 3,000 rpm, Main motor: 20 hp, Turret capacity: 12, Machine weight: 10,150 pounds, Chip conveyor, All Manuals Available. Located in Detroit, MI
Stock #: 104438
6" 3 Jaw Chuck, Max Swing: 12.99", Max Turning Dia: 5.35", Swing Over Cross Slide: 5.35", Max Turning Length: 5.9", Bar Capacity: 1.37", Ravel: X- 9", Z- 9", Spindle Speed: 45-4500 RPM, Spindle Nose: A2-5, # Tool Stations: 6, Fanuc O-TD Control, All Available Manuals Included. Located in Detroit, MI
Stock #: 104439
Max Turning Diameter: 26.37", Max Turning Length: 70.86", Max Bar Capacity: 5.1", Swing Over Bed: 35.8", Swing Over Carriage: 33.3", Distance Between Centers: 76.0". Travel: C Axis : 360° (0.001°), Rapid Traverse X Axis: 630 IPM, Rapid Traverse Z Axis: 790 IPM. Spindle: Spindle Nose: A2-11, Spindle Bore: 6.1", Spindle Speed: 15 - 1500 RPM, Spindle Motor: 50hp. Turret: Turret Capacity: 12 Live Stations, Turret Index Time: 0.15 Second, Tool Size: 2.4". Live Tool Speed: Live Tool Motor: 10 HP. Tailstock: Tailstock Taper: MT-5 Tailstock Body Travel: 60.5", Tailstock Quill Dia.: 4.7", Tailstock, Quill Travel: 4.7", Fanuc 18it Control. Located in Detroit, MI
Stock #: 104440
Max Turning Diameter: 13.77", Max Turning Length: 24.02", Distance Between Centers: 24.29", Max Bar Capacity: 3.07", Swing Over Bed: 19.68", Swing Over Cross Slide: 15.75", X Axis Travel: 7.87", Z Axis Travel: 24.01", Rapid Traverse X Axis: 944 IPM, Rapid Traverse Z Axis:n1180 IPM, Spindle Nose: A2-8, Spindle Bore: 3.62", Spindle Speed: 35 - 3500 RPM, Spindle Motor: 25HP, Turret Capacity: 12 Stations, Turret Index Time: 0.18 Second, Tailstock Taper: MT-5, Tailstock Quill Dia.: 3.54", Tailstock Quill Travel: 4.72", Fanuc 18T Control, 10" Chuck. Located in Detroit, MI
Stock #: 104441
Swing Over Bed & Carriage Ways 26", Swing Over Cross Slide 18 1/4", Distance Between Centers 72", Size of Hole Thru Spindle 2 1/8", Size of Tool Holder 1 1/16" x 1 1/2", Spindle Speeds 12, Spindle, Speed Range 16 -1200 RPM, Carriage Length on Bed 26", Bridge Width 9", Cross Slide Travel 14 1/4", Compound Rest Travel 4 3/4", Feed Changes 48, Feed Range .0036 IPR - .205 IPR, Thread Changes 48, Threads 2 - 112 TPI, Leadscrew Diameter 1 7/18, Tailstock Spindle Diameter 3 1/8", Center Morse Taper 5, Motor 30 HP. 1800 RPM, Weight 8,250 lbs., Aloris Tool Post And Holders Included. Located in Detroit, MI
Stock #: 104442
Swing 15", Center Distance 60", Spindle Speeds 44 - 2000 RPM, Bar capacity 1.5". Equipped with: Inch / Metric Threading, Steady Rest, Coolant Pant, Foot Treadle, Tailstock, Assorted Faceplates, 220 Volt, 3 Phase. Located in Detroit, MI
Stock #: 104443
VIN:3ALXA7007KDKD9947.Starts/Runs/Drives. Detroit 12.7L Engine, ZF Autoshift Transmission, Very Low Miles, Never Used. (Lot #19). Item Location - McCook, IL
Stock #: 104444
Dump With Liner, Works Well. Item Location - McCook, IL
Stock #: 104445
Type 03939036 Swiss Made, 35"x37". Machine height 65", Cabinet height 30", 300kg. Loading not provided. Located in Romulus, MI.
Removal: Removal will begin the Monday following the auction close, March 31, 2025. Small items that can be carried out should be removed no later than Friday, April 4, 2025. All items must be removed by Friday, April 11, 2025, unless otherwise discussed and approved by LRG. Shipping: Shipping and transportation are the buyer's responsibility.
We use cookies to improve your experience. Privacy Policy.
