52" x 6.00" x 30,000# Paxson Slitting Line

Description

52" wide x 30,000 lb. coil capacity Loop Type Driven Slitting Line, coil size 20" I.D. x 72" O.D., line direction left to right, operating speed 350–400 FPM, controls upgraded in 2009 with new PLC and control pulpit, consisting of: Entry Coil Car, above-ground L-type with self-contained hydraulics, 7.5 HP AC motor, 1,750 RPM, 230/460V, Uncoiler with expanding mandrel, hydraulic expansion, water-cooled drag brake, sliding base, powered hold-down arm, Hydraulic Peeler Table with pinch rolls, (2) Slitter Heads with 52" arbor face, drop-in heads, 6" diameter arbors, entry side guides, 75 HP Reliance DC drive motor, 1,750 RPM, 500V, Looping Pit, Cross Over Table, (1) Scrap Winder with self-dumping feature, oscillating scrap guide, hydraulic motor drive, Loopco Tension Stand, drag board type with air cylinders for pressure, entry separator tooling bar, exit passline roll, Recoiler with 20" diameter drum, 54" drum face, manual expand and gripper, hydraulic pushoff, overarm separator, Foote-Jones reducer with 16.692:1 ratio, 60 HP Reliance AC motor with belt drive to reducer, 1,770 RPM, 230/460V, Exit Coil Car with 48" wide deck, self-contained hydraulics, hand pendant control, Braner Exit Turnstile with two arms, powered rotation and pushoffs, Main Operator's Control Panel, Main Hydraulic Power Unit, in storage in Toledo, OH.