Multiple Locations, United States
Machine & MRO Consignment Sale. Multiple Locations! Electrical MRO Equipment, Press Brake, Industrial Oven, LeBlond and Lodge & Shipley Lathes, Vertical CNC Machines, Reflow Oven, Cam and Crankshaft Polisher, Laser Cutter, and Much More!
Stock #: 104285
Serial # RT1-103 8 Stroke 19 Max Die Space Loading Not Provided
Stock #: 104286
Dimensions: Approx. 6'x24' Weight: Approx. 15,000 lbs Loading available on-site for an additional cost
Stock #: 104287
SN: 79705A0304, Est. Year 2010. Condition Poor, Max Temperature- 750 Degrees F; Minor Leak Around Doors; Good-Working Condition. Rigging Required. Unit # 13.
Stock #: 104288
SN: 46448, Electric Fuel Type; Good-working condition. Unit C-L22. Rigging Required
Stock #: 104289
SERIAL# 6E 265 MODEL REGAL SWING OVER WAYS 19-1/2" SWING OVER CROSS SLIDE 13" DISTANCE BETWEEN CENTERS 72" SPINDLE SPEEDS (12) 40 TO 1600 RPM FEEDS (48) .0018 TO .104 IPR THREADS (48) 2 TO 112 TPI DIAMETER OF SPINDLE HOLE 1-49/64" TAPER ATTACHMENT YES 3-JAW CHUCK 15" HARDEN REPLACEABLE WAYS YES CARRIAGE STOPS YES THREAD DIAL YES COOLANT WITH CHIP PANS YES MOTOR 10 HORSEPOWER Aloris tool post with assorted holders and tooling
Stock #: 104290
Swing Over Bed & Carriage Ways 26", Swing Over Cross Slide 18 1/4", Distance Between Centers 72", Size of Hole Thru Spindle 2 1/8", Size of Tool Holder 1 1/16" x 1 1/2", Spindle Speeds 12, Spindle Speed Range 16 - 1200 RPM, Carriage Length on Bed 26", Bridge Width 9", Cross Slide Travel 14 1/4", Compound Rest Travel 4 3/4", Feed Changes 48, Feed Range .0036 IPR - .205 IPR, Thread Changes 48, Threads 2 - 112 TPI, Leadscrew Diameter 1 7/18, Tailstock Spindle Diameter 3 1/8", Center Morse Taper 5, Motor 30 HP. 1800 RPM, Weight 8,250 lbs., Aloris tool post and holders included.
Stock #: 104291
Capacity: 200mm X 2000mm Length, Electrical Cabinet, Hydraulic Unit, Filtration Unit,Jib Crane Not Included.
Stock #: 104293
Standard turning diameter 27.5", Swing over carriage 27.5", Maximum cross travel (X axis) 15.7", Maximum longitudinal travel (Z axis) 78.7", Distance between centers 88.5", Spindle: Spindle Motor 35 HP, Spindle nose A2-11, Spindle RPM 0-3000 (12" Chuck) Hole through spindle 4.5", Bar Capacity 4.1", Spindle bearing diameter 6.3", Spindle inside taper M.T. 7, Hydraulic chuck 12" 3-Jaw, Turret: Turret tool positions 12, Tailstock: Quill diameter of tailstock 7.87", Quill stroke of tailstock 5.9", Quill taper of tailstock M.T. 7, Tailstock body travel 66.9", VDI tool shank type 60mm 12", Hydraulic chuck, Fanuc Oitc control.
Stock #: 104294
Max Swing Dia: 720mm, Max cutting length: 1000mm, Max cutting Dia: 500mm, Max swing over saddle: 550mm, Spindle Nose: A2-8, Hole Dia: 80mm, Max Bar Capacity: 65mm, Spindle speed range: 30-3000 rpm, 30 kw motor, 10" 3 jaw chuck, X axis travel: 280mm, Z axis travel: 1070mm, 12 position turret, Tailstock chip conveyor w/coolant tray, Fanuc Oi-TD control, All available manuals
Stock #: 104295
Model:1707EXL,S/N:1105G2-A7R2-80760-03,240 Volt,100 Amp,3 Phase,50/60Hz,Largest Heater Load 25 Amp,Short Circuit Interupting Capacity:5000A,Electrical Dwg:B-686834REV-D,Manufactured Date:November 2005
Stock #: 104296
Type:E,S/N:Ecx360-2158-9653 KF,Attachment:S520127,3 1/2' Forks,Truck Weight:8148Lbs
Removal: Small items that can be carried out should be removed immediately after the auction sale and no later than Friday, August 9, 2024. All items must be removed by Friday, August 16, 2024, unless otherwise discussed and approved by LRG. Shipping: Shipping and transportation are the buyer's responsibility.
We use cookies to improve your experience. Privacy Policy.