Cosmetic Production Filling Line Includes:
EconoLine Wrap Labeling System - E100 Side Mounted Labeling Head * 6 1/4" web width (6 1/8" max. label width) * 12" label unwind capacity * Stepping motor label drive * Dispensing speeds variable at up to 800"/ min * Heavy Duty Vertical & Horizontal Head support * M3 microprocessor controller * Setup memory for up to 50 product presets * Flash upgradeable interface to make software updates fast and simple * No batteries to wear out or replace * Easy to read backlit LCD display * Intuitive operator panel with keyed access to system set-up screens * Complete I/O system diagnostics * Variable speed conveyor assembly * Stainless steel frame * 4-1/2" wide x 120" (10 foot) long x 32" high on casters * Product metering belt * Leuze clear label sensor
Oden Machine Servo Filling Machine - Display and PLC housed in sealed NEMA 4 stainless steel enclosure.
-3.5” Color touch screen
- Touch screen operator interface provides easy access to every filler control function including pump speed, volume, and cut-off adjustment for electronic control of no-drip product cut-off.
-Non-volatile memory storage of all machine set up with one-key “recipe” loading.
-Oden’s CleanGear pumps available in 1.5, 3.0 & 6.0 GPM flow rates.
- One horsepower 90 VDC armature motor and in-line helical gear reducer. Also available with 1.5 horsepower motor.
-Footswitch control for manual operation and built-in cycle timer for semi-automatic operation.
-Oden 316L stainless steel positive shut-off nozzle providing clean no-drip product cut off.
ACASI: 6 Head Gravity Filler - Model: EP2000A7 Serial No. 1016-42808-216-149 GI-3300 Automatic Pressure filler Filling Nozzle (3/8", 1/2", 5/8" or 3/3") Pneumatic Drip Tray Foal with Ball Valve
EPAK: 6 Head Automatic Gravity Filler - * 304 stainless steel heavy-duty frame construction * 316 stainless steel 3/4" pneumatic actuated fill valves * Braided PVC tubing and fittings * Stainless steel product reservoir *Small product supply tank and pump to supply main tank's constant head pressure * User-friendly Allen Bradley /Micrologix 1200 controls with color touch screen and automatic set-up capabilities * Automatic drip tray protects bottles from potential drips * Automatic pin-style indexing to bring bottles in and out of fill station * Photo sensor/counter system to ensure containers are in place prior to filling * 115V/1f/50-60Hz, 80-100psi compressed clean dry air * Motor starter and supply pump not included
Oden Machine Servo Filling Machine - - Fully automatic filling including all indexing and control functions with purchase of Oden automation package.
-Net/Mass net weight filling capability. By addition of Coriolis mass flow meter, system can be operated in new weight mode.
Explosion-proof (hazardous location) construction to class 1, division 2, group D standards using the X-purge method.
Local product reservoir level control sensors and logic. A complete range of sensors and software-based control logic is available.
- Automatic nitrogen purge to reduce or eliminate entry of oxygen into the product during filing.
- Air pulse-assisted product cut-off system for stringy products
- Vacuum aspiration for no-drip subsurface filling.
- Waukesha Universal Series sanitary lobe pumps available in flow rates from 4 GPM to 30 GPM.
- Stainless steel exotic metal and non-metallic product reservoirs from 5 gallon to 58-gallon capacity.
- Stainless steel sanitary conveyors with fully automatic indexing capability.
- Diving nozzle (bottom-up fill) assemblies.
- Vertical form/fill/seal mounts and nozzles, including electronics for remote start and end of fill signals for integration.
- Air Requirements: 80 PSI @ 1 SCFM
- Electrical Requirements: 115 -120 VAC 50-60 HZ.
40" Accumulation Turntable - * 304 stainless steel frame construction * Standard line height 32"-38" * Clockwise or counterclockwise rotation * Single 1" flat rail system with HDPE bottle contact surface * Tool-less adjustable rail brackets * Variable speed control box mounted on machine cabinet * 115/230Volt/1f/50-60Hz * Wrap station * 115 volts, 50/60 cycle, single-phase electrical
12.5' Conveyor - * 304 stainless steel shell construction * 4.5" wide Delrin chain belt * Standard line height range 32-38" * Single 1" flat stainless steel rail system with HDPE wear strip * Tool-less adjustable rail brackets * Standard 90Volt DC 1/2HP motor * Variable speed control box * 115/230Volt/1f/50-60Hz
10' Conveyor - * 304 stainless steel shell construction * 4.5" wide Delrin chain belt * Standard line height range 32-38" * Single 1" flat stainless steel rail system with HDPE wear strip * Tool-less adjustable rail brackets * Standard 90Volt DC 1/2HP motor * Variable speed control box * 115/230Volt/1f/50-60Hz
10' Conveyor - * 304 stainless steel shell construction * 4.5" wide Delrin chain belt * Standard line height range 32-38" * Single 1" flat stainless steel rail system with HDPE wear strip * Tool-less adjustable rail brackets * Standard 90Volt DC 1/2HP motor * Variable speed control box * 115/230Volt/1f/50-60Hz
ACASI -TruCap-4 Cap Tightener - * Pneumatic Clutch Set
EPAK: 3 Station Screw Cap Tightener - * 304 stainless steel and anodized aluminum internal components * Variable speed drive controls for spindle wheels and gripper belts * Independent pneumatic clutch torque control for 2nd & 3rd spindle set, adjustable during operation * Power height adjustment * All controls and adjustments located in face plate for ease of changeover * Short guarding with interlocking entry door only * Cap chute, anodized aluminum, tool-less for ease of changeover with extension * Cap stabilizer assembly & poly foot to assist in starting caps * 115V/1f/50-60Hz
