Equipment No Longer Needed at Three M Tool and Machine

Stock #: 103740

Giddings and Lewis Model RT-1600 CNC Boring Mill Travels: Table X-141.7", Traverse Rate-709 IPM Y-102.4" Y-97" Above Table Saddle W-59" Z-49.2" 4 Speed Headstock Spindle Diameter: 6.1" Spindle Speeds: 1-3500 RPM Range 1: 1-185 RPM Range 2: 174-463 RPM Range 3: 446-1190 RPM Range 4: 1116-3500 RPM Diving Power: 74 HP Driving Power (Continuous): 50HP Constant Torque (s6-40) Rating: 5532 Ft-Lbs Tooling Interface for Main Spindle: ANSI B5.50 #50 with ANSI B5.50 Retention Knob 120 Position Tool Changer Max Tool Weight: 110 LBS Max Magazine Capacity: 6615 Lbs Max Tool Diameter (all pockets empty) 9.8” Max Tool Diameter: 11” Max Tool Length: 28.5” Max Tool Movement: 81 Ft-lbs Tool to Tool Time: 15 seconds Renishaw RMP60 Probe with Radio Transmission Production coolant system (Above ground) 60 hertz Coolant tank capacity: 251 ga Coolant thru spindle: 1015 PSI Coolant thru nozzles: 160 PSI GE Fanuc 310i High-Performance CNC with Machine Control Panel 305” Floppy Disk Drive Rigid Tapping High-Level Programming capability Remote MPG Built-in Rotary Table 63” x 78.7” 360,000 in .001 degree increments Rotary B-axis feed: 6 RPM Max Table Weight: 55,100 lbs. Axis Feedback: Coded Linear Scale Feedback: X, Y, & W Axes Servo Motor Encoded Z-axis Direct Feedback Encoder B-Axis

Stock #: 103739

Giddings & Lewis PT 1800 Plain Table Horizontal Boring Mill Table Size: 70.9” x 141.7” Table Load: 88,200 lbs. Headstock Y Travel: 141.7 Traverse rate 709 IPM Saddle Travel W Axis: 78.7” X-axis travel table: 141.7” Headstock/ Spindle: 6.1” Spindle Diameter 4 Speed Headstock 1-187, 174-463, 446-1190, 116-3500 RPM Spindle HP72, 50 Continuous Rating Constant Torque Rating 5532 Ft-Lbs. Continuous Rating 3750 Ft-lbs. Tooling Interface Spindle: ANSI B5.50 No.50 with ANSI B5.50 Retention Knob Automatic Tool Changer Position Max Weight 110 Lbs. Fanuc 310i CNC Control, with process monitoring and probing Renishaw High Precision Motorized Arm and Probe Tooling Coolant System 70 Bar (1015) psi @ 4 GPM Chip Flush System with Paper Filter and 396-Gal Tank Chip Conveyor System: Leaf type at floor level at front of machine 12” wide x 54” high discharge left side

Stock #: 103738

Giddings and Lewis Model RT-1600 CNC Boring Mill Travels: Table X-141.7", Traverse Rate-709 IPM Y-102.4" Y-97" Above Table Saddle W-59" Z-49.2" 4 Speed Headstock Spindle Diameter: 6.1" Spindle Speeds: 1-3500 RPM Range 1: 1-185 RPM Range 2: 174-463 RPM Range 3: 446-1190 RPM Range 4: 1116-3500 RPM Diving Power: 74 HP Driving Power (Continuous): 50HP Constant Torque (s6-40) Rating: 5532 Ft-Lbs Tooling Interface for Main Spindle: ANSI B5.50 #50 with ANSI B5.50 Retention Knob 120 Position Tool Changer Max Tool Weight: 110 LBS Max Magazine Capacity: 6615 Lbs Max Tool Diameter (all pockets empty) 9.8” Max Tool Diameter: 11” Max Tool Length: 28.5” Max Tool Movement: 81 Ft-lbs Tool to Tool Time: 15 seconds Renishaw RMP60 Probe with Radio Transmission Production coolant system (Above ground) 60 hertz Coolant tank capacity: 251 ga Coolant thru spindle: 1015 PSI Coolant thru nozzles: 160 PSI GE Fanuc 310i High-Performance CNC with Machine Control Panel 305” Floppy Disk Drive Rigid Tapping High-Level Programming capability Remote MPG Built-in Rotary Table 63” x 78.7” 360,000 in .001 degree increments Rotary B-axis feed: 6 RPM Max Table Weight: 55,100 lbs. Axis Feedback: Coded Linear Scale Feedback: X, Y, & W Axes Servo Motor Encoded Z-axis Direct Feedback Encoder B-Axis

Stock #: 103736

Measuring range Y- 4.0 Meters (157") Y-6.0 meters (236.4") Z-3.0 meters (118.2") Accuracy with VAST Gold or RDS/VAST XXT: MPE_E= (6.0+L/250) L in MPE_P=3.2 um MPE_THP+5.8 um MPE_TAU-78s Interlocking Drives Roller Bearing Second Scale in Y AXIS Safety Position for loading by a crane Collision Protection for Z-Shaft and Probehead in Manual Mode Temperature Compensation for Machine & Workpiece System Integration Controller: C99 Controller Cabinet/TS8/ND DINA CL Basis C99 Series 3 USB Stick for SR VII Ribbon Cable 10 Pole Cycle/Control PCI Option LAN C99 Pre-production Option SP MMZ C99N E-Package MMZ C99N VAST Option Dual Read Control Panel "Dynalog P3 XGA for PC Data System Support for Dynalog P3 Control Panel Adjustable, Turntable Software: Calypso CNC Geometry Software with Electronic Users Guide Calypso Step to SAT Converter Calypso CATIA V5 Converter Calypso Curve Measuring Software Calypso Navigator Measuring Technology HP Computer System 2-Gard Drives 2 LAN Cards Printer Integration & System Test Scanning Sensor's: VAST Gold Scanning Probe Head Reference Stylus Probe Change Magazine MSR Mounting Plate for MSR Individual Probe Socket for VAST Magazine Styli Kit Large Parts Accessories: Computer Table Refrigerated Air Dryer Calibration Sphere Diameter - 30MM Calibration Sphere mounting kit Extension 400mm for Calibration Sphere

Stock #: 103737

2008 Giddings & Lewis VTC 2500 Adjustable Rail Vertical Turning Center Max Swing: 106.29" Rail Height: 98.43" Max Height Table top to Rail bottom: 98.43" Min. Height Table top to Rail Bottom: 39.37" 2 Speed Table Drive Tranmission: 4.05:1 Gear Ratio AC Motor H.P.: (S6-40 Rating) 100.6 H.P. (Cont. Rating) 75 H.P. Table/Chuck Speed: Inf. Variable-1-200 RPM Low Range: 1-58 RPM High Range: 1-200 RPM Ram Travel: Vertical Ram-Z Axis: 68.89" Horizontal-X Axis: Right of Center (+X Axis): 61.41" Left of Center (-X Axis) 61.41" Power Assit of rotary setup stand 360 Degree-With High and Low speed selection Pallet Locator & Stationary indicator Stand Automatic Pallet Changer Consisting of: 1-Rotary Pallet Changer 1-Plain Parking Stand 1-Rotating Base set up station Pallet Locator & Stationary indicator Stand Max Pallet Swing: 106.29" Max Pallet Load: 26,400 Lbs Approx. Pallet Change Time: 120 Sec. Live Spindle/C-Axis Package: Live Spindle H.P.-44 H.P. (S6-40%) 29 H.P. (Cont. Rating)